Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO-HX
Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO-HX
Bonjour à tous,
J'ai installé Windows Embedded Standard 7 SP1 AIO-HX 32 bits sur mon pc.
J'ai besoin d'installer Net Framework 3.5, mais lorsque que j'essaye de l'installer Windows me dit d'activer Net Framework dans les fonctionnalités Windows.
Le problème est que dans les fonctionnalités Windows je n'est qu'Internet Explorer 11.
Je ne trouve aucun moyen de l'activer différemment.
Aidez-moi svp je désespère.
De plus j'ai remarqué que les mises à jours Windows embedded se termine à chaque fois par un échec et les mises à jours Net Framework forçément.
J'ai installé Windows Embedded Standard 7 SP1 AIO-HX 32 bits sur mon pc.
J'ai besoin d'installer Net Framework 3.5, mais lorsque que j'essaye de l'installer Windows me dit d'activer Net Framework dans les fonctionnalités Windows.
Le problème est que dans les fonctionnalités Windows je n'est qu'Internet Explorer 11.
Je ne trouve aucun moyen de l'activer différemment.
Aidez-moi svp je désespère.
De plus j'ai remarqué que les mises à jours Windows embedded se termine à chaque fois par un échec et les mises à jours Net Framework forçément.
- palerider
- Administrateur du site
- Messages : 6380
- Enregistré le : lun. 21 mars 2011 09:18
- A remercié : 35 fois
- A été remercié : 146 fois
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
Salut,
On va contrôler les services,
On va contrôler les services,
- Télécharge Farbar Service Scanner sur ton bureau.
- Lance le, coche les cases comme sur cette capture :
- Clique sur "Scan" puis patiente jusqu'à l'ouverture du rapport.
- Copie/Colle le contenu de ce rapport dans ton prochain message.
- Note : Le rapport est également sauvegardé dans le dossier d'exécution de FSS.exe ( il se nomme FSS.txt )
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
Merci de ton aide. Voici le rapport :
Farbar Service Scanner Version: 21-07-2014
Ran by Jérémy (administrator) on 16-11-2014 at 14:49:47
Running from "C:\Users\Jérémy\Downloads"
Microsoft Windows Embedded Standard Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Dnscache Service is not running. Checking service configuration:
The start type of Dnscache service is set to Disabled. The default start type is Auto.
The ImagePath of Dnscache service is OK.
The ServiceDll of Dnscache service is OK.
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
Checking LEGACY_mpsdrv: ATTENTION!=====> Unable to open LEGACY_mpsdrv\0000 registry key. The key does not exist.
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is set to Disabled. The default start type is Auto.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
Firewall Disabled Policy:
==================
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
VSS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to retrieve start type of VSS. The value does not exist.
Checking ImagePath: ATTENTION!=====> Unable to retrieve ImagePath of VSS. The value does not exist.
System Restore Disabled Policy:
========================
Security Center:
============
wscsvc Service is not running. Checking service configuration:
The start type of wscsvc service is set to Demand. The default start type is Auto.
The ImagePath of wscsvc service is OK.
The ServiceDll of wscsvc service is OK.
Windows Update:
============
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Other Services:
==============
File Check:
========
C:\Windows\system32\nsisvc.dll => File is digitally signed
C:\Windows\system32\Drivers\nsiproxy.sys => File is digitally signed
C:\Windows\system32\Drivers\afd.sys => File is digitally signed
C:\Windows\system32\Drivers\tdx.sys => File is digitally signed
C:\Windows\system32\Drivers\tcpip.sys => File is digitally signed
C:\Windows\system32\dnsrslvr.dll => File is digitally signed
C:\Windows\system32\mpssvc.dll => File is digitally signed
C:\Windows\system32\bfe.dll => File is digitally signed
C:\Windows\system32\Drivers\mpsdrv.sys => File is digitally signed
ATTENTION!=====> C:\Windows\system32\SDRSVC.dll FILE IS MISSING AND SHOULD BE RESTORED.
ATTENTION!=====> C:\Windows\system32\vssvc.exe FILE IS MISSING AND SHOULD BE RESTORED.
C:\Windows\system32\wscsvc.dll => File is digitally signed
C:\Windows\system32\wbem\WMIsvc.dll => File is digitally signed
C:\Windows\system32\wuaueng.dll => File is digitally signed
C:\Windows\system32\qmgr.dll => File is digitally signed
C:\Windows\system32\es.dll => File is digitally signed
C:\Windows\system32\cryptsvc.dll => File is digitally signed
ATTENTION!=====> C:\Program Files\Windows Defender\MpSvc.dll FILE IS MISSING AND SHOULD BE RESTORED.
C:\Windows\system32\ipnathlp.dll => File is digitally signed
C:\Windows\system32\iphlpsvc.dll => File is digitally signed
C:\Windows\system32\svchost.exe => File is digitally signed
C:\Windows\system32\rpcss.dll => File is digitally signed
**** End of log ****
Farbar Service Scanner Version: 21-07-2014
Ran by Jérémy (administrator) on 16-11-2014 at 14:49:47
Running from "C:\Users\Jérémy\Downloads"
Microsoft Windows Embedded Standard Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Dnscache Service is not running. Checking service configuration:
The start type of Dnscache service is set to Disabled. The default start type is Auto.
The ImagePath of Dnscache service is OK.
The ServiceDll of Dnscache service is OK.
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
Checking LEGACY_mpsdrv: ATTENTION!=====> Unable to open LEGACY_mpsdrv\0000 registry key. The key does not exist.
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is set to Disabled. The default start type is Auto.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
Firewall Disabled Policy:
==================
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
VSS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to retrieve start type of VSS. The value does not exist.
Checking ImagePath: ATTENTION!=====> Unable to retrieve ImagePath of VSS. The value does not exist.
System Restore Disabled Policy:
========================
Security Center:
============
wscsvc Service is not running. Checking service configuration:
The start type of wscsvc service is set to Demand. The default start type is Auto.
The ImagePath of wscsvc service is OK.
The ServiceDll of wscsvc service is OK.
Windows Update:
============
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Other Services:
==============
File Check:
========
C:\Windows\system32\nsisvc.dll => File is digitally signed
C:\Windows\system32\Drivers\nsiproxy.sys => File is digitally signed
C:\Windows\system32\Drivers\afd.sys => File is digitally signed
C:\Windows\system32\Drivers\tdx.sys => File is digitally signed
C:\Windows\system32\Drivers\tcpip.sys => File is digitally signed
C:\Windows\system32\dnsrslvr.dll => File is digitally signed
C:\Windows\system32\mpssvc.dll => File is digitally signed
C:\Windows\system32\bfe.dll => File is digitally signed
C:\Windows\system32\Drivers\mpsdrv.sys => File is digitally signed
ATTENTION!=====> C:\Windows\system32\SDRSVC.dll FILE IS MISSING AND SHOULD BE RESTORED.
ATTENTION!=====> C:\Windows\system32\vssvc.exe FILE IS MISSING AND SHOULD BE RESTORED.
C:\Windows\system32\wscsvc.dll => File is digitally signed
C:\Windows\system32\wbem\WMIsvc.dll => File is digitally signed
C:\Windows\system32\wuaueng.dll => File is digitally signed
C:\Windows\system32\qmgr.dll => File is digitally signed
C:\Windows\system32\es.dll => File is digitally signed
C:\Windows\system32\cryptsvc.dll => File is digitally signed
ATTENTION!=====> C:\Program Files\Windows Defender\MpSvc.dll FILE IS MISSING AND SHOULD BE RESTORED.
C:\Windows\system32\ipnathlp.dll => File is digitally signed
C:\Windows\system32\iphlpsvc.dll => File is digitally signed
C:\Windows\system32\svchost.exe => File is digitally signed
C:\Windows\system32\rpcss.dll => File is digitally signed
**** End of log ****
- palerider
- Administrateur du site
- Messages : 6380
- Enregistré le : lun. 21 mars 2011 09:18
- A remercié : 35 fois
- A été remercié : 146 fois
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
Télécharge Services Repair de Eset et enregistre le fichier sur ton Bureau
Ferme toutes les applications, y compris ton navigateur
Double-cliquer sur ServicesRepair.exe pour lancer l'application
/!\ Sous Vista et Windows 7, il faut lancer le fichier par clic-droit -> Exécutez en tant qu'administrateur
Validez par Yes pour confirmer le lancement de l'outil
Laisser l'outil travailler (cela peut prendre quelques minutes)
Valider par Yes pour redémarrer le PC
Ensuite tu peux tester voir si les mises à jour se fonts

Ferme toutes les applications, y compris ton navigateur
Double-cliquer sur ServicesRepair.exe pour lancer l'application
/!\ Sous Vista et Windows 7, il faut lancer le fichier par clic-droit -> Exécutez en tant qu'administrateur
Validez par Yes pour confirmer le lancement de l'outil
Laisser l'outil travailler (cela peut prendre quelques minutes)
Valider par Yes pour redémarrer le PC
Ensuite tu peux tester voir si les mises à jour se fonts

Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
J'ai fais ce que tu as dit mais rien n'a changé. Toujours échec des mises à jours. Je ne sais pas si ça peu te servir mais services repair n'a mis que quelques secondes à réparer
- Nash
- Administrateur du site
- Messages : 4403
- Enregistré le : sam. 6 nov. 2010 14:19
- Localisation : 89
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
a tester peut etre l'outil de Microsoft :
http://support.microsoft.com/kb/2698555/fr" onclick="window.open(this.href);return false;
lien : http://www.microsoft.com/en-us/download ... x?id=30135" onclick="window.open(this.href);return false;
sinon tu as cet outil pour supprimer tous les Framework et ensuite les re installer au propre : ici
avant de re installer efface les quelques traces restantes apres avoir passer l'outil , deroule la clé dans la bdr :
HKEY_CLASSES_ROOT/ Installer/ Products
supprime les clés DDE7F2BCF1D91C3409CFF425AE1E271A
et
D6461317C3DC4FO4799BDCE9E42626FE
Ensuite re installe Framework avec ses liens :
http://www.microsoft.com/fr-fr/download ... aspx?id=26" onclick="window.open(this.href);return false;
http://download.microsoft.com/download/ ... etfx35.exe" onclick="window.open(this.href);return false;
http://www.microsoft.com/fr-fr/download ... x?id=17718" onclick="window.open(this.href);return false;
si Windows update ne fait pas les majs alors il faudra aussi ceux la :
http://download.microsoft.com/download/ ... etfx35.exe" onclick="window.open(this.href);return false;
http://www.microsoft.com/fr-fr/download ... x?id=30653" onclick="window.open(this.href);return false;
http://support.microsoft.com/kb/2698555/fr" onclick="window.open(this.href);return false;
lien : http://www.microsoft.com/en-us/download ... x?id=30135" onclick="window.open(this.href);return false;
sinon tu as cet outil pour supprimer tous les Framework et ensuite les re installer au propre : ici
avant de re installer efface les quelques traces restantes apres avoir passer l'outil , deroule la clé dans la bdr :
HKEY_CLASSES_ROOT/ Installer/ Products
supprime les clés DDE7F2BCF1D91C3409CFF425AE1E271A
et
D6461317C3DC4FO4799BDCE9E42626FE
Ensuite re installe Framework avec ses liens :
http://www.microsoft.com/fr-fr/download ... aspx?id=26" onclick="window.open(this.href);return false;
http://download.microsoft.com/download/ ... etfx35.exe" onclick="window.open(this.href);return false;
http://www.microsoft.com/fr-fr/download ... x?id=17718" onclick="window.open(this.href);return false;
si Windows update ne fait pas les majs alors il faudra aussi ceux la :
http://download.microsoft.com/download/ ... etfx35.exe" onclick="window.open(this.href);return false;
http://www.microsoft.com/fr-fr/download ... x?id=30653" onclick="window.open(this.href);return false;

• Ryzen 9 5900x
• B550 AORUS PRO
• RTX 3060ti phoenix
• thermaltake core p8 tg
• 1 x SSD 500GB PCIe4 M.2 SEA
• 32 G DDR4 3600 corsaire
• Corsaire 1000w full modulaire passive
• MasterLiquid ML240R RGB
•1 to stockage NVME.M2 PCIe
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
Dans menu démarrer va dans executé et tape services.msc et active en automatique les services que tu as besoin .
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
Déjà fait aussi mais rien ne concerne net framework dans les services
Et juste pour info : je ne suis pas novice en informatique donc les "trucs" de bases je les aient déjà fait. J'ai effectué beaucoup de recherches sur internet mais je n'ai rien trouvé. N'hésitez pas à me parler avec un language "informatique" je comprendrais
Et juste pour info : je ne suis pas novice en informatique donc les "trucs" de bases je les aient déjà fait. J'ai effectué beaucoup de recherches sur internet mais je n'ai rien trouvé. N'hésitez pas à me parler avec un language "informatique" je comprendrais
- Nash
- Administrateur du site
- Messages : 4403
- Enregistré le : sam. 6 nov. 2010 14:19
- Localisation : 89
Re: Net framework 3.5 et Windows Embedded Standard 7 SP1 AIO
tu as tester le log de xplode ?
http://blog.security-helpzone.com/micro ... ndows.html" onclick="window.open(this.href);return false;
ou celui de Ramesh :
http://www.thewindowsclub.com/repair-fi ... wu-utility" onclick="window.open(this.href);return false;
le mieux serait quand meme de contacter le createur de ton AIO pour savoir ce qu'il a trifouiller la dedans lol
http://blog.security-helpzone.com/micro ... ndows.html" onclick="window.open(this.href);return false;
ou celui de Ramesh :
http://www.thewindowsclub.com/repair-fi ... wu-utility" onclick="window.open(this.href);return false;
le mieux serait quand meme de contacter le createur de ton AIO pour savoir ce qu'il a trifouiller la dedans lol

• Ryzen 9 5900x
• B550 AORUS PRO
• RTX 3060ti phoenix
• thermaltake core p8 tg
• 1 x SSD 500GB PCIe4 M.2 SEA
• 32 G DDR4 3600 corsaire
• Corsaire 1000w full modulaire passive
• MasterLiquid ML240R RGB
•1 to stockage NVME.M2 PCIe